Fan Speed
It is used to set the speed of the AC unit fan.
The speed is set in automatic mode by default, imposing
the flow depending on the number of zones in demand.
In fancoil installations, the system speed can be manually
selected from the Master thermostat.
High speed
Medium speed
Low speed
Automatic speed
Navigation through zones:
zone and you will access the list of zones of the system.
Once there, you will find information about the state of
each zone. You will also have the possibility to switch on
or off zones.
Moreover, you can control all the parameters of a zone
just pressing on it.
Air conditioning control: on/off; temperature, mode,
etc.
Time schedules: create a time schedule or activate/
deactivate an existing one. (See page 10).
System consumption. (See page 11)
Zone settings. (See page 11)
If you want any of your changes to apply to the rest of
the zones, press the option "all zones" and make all your
changes.
Press on the name of the
Edit names: Press and
hold on the name of the
zone to access the name
editor. Then, change the
name.
Remote zone icons:
Exit zone. It closes the
zone and returns to the
main zone.
It returns to the list
of zones.
8
EN