Remote Control; Working Mode; Bluetooth Pairing - LTC Audio PAA150BT Bedienungsanleitung

3. REMOTE CONTROL

STANDBY/ON: Switches the amplifier between ON
and Standby mode
Input selection button. Selects: USB/SD,
BLUETOOTH, FM, LINE inputs
Press this button to stop music playback from
USB/SD
Mute the audio on the amplifier; The mute mode
is indicated by the source and speaker LEDs
flashing. Press again to cancel mute.
First press to repeat current song in USB/SD,
second press to repeat all songs in USB/SD
You can select among 7 preset EQ sets
Numerical track selection
Press the number of the desired track. The
track will then play automatically.
VOL+: Press this button to increase the
volume
VOL-: Press to decrease the volume
CH-: Press to select previous song under
USB/SD/BT input. Previous station under
FM mode
 CH+: Press to select next song under USB/SD/BT input.
In FM mode: select next station
: Play/pause music from USB/SD

4. WORKING MODE

4.1. USB/SD mode
When you plug in an USB/SD media, it will play automatically the music from USB/SD
device.
4.2. LINE input
Press the MODE button on remote or input selector button on front panel to select
LINE mode. The amplifier will play the music from the Line input.

4.3. BLUETOOTH PAIRING

Set the input mode to BLUETOOTH. Turn on the Bluetooth feature on your
smartphone. Search for a Bluetooth device. The Bluetooth name of the amplifier is
BLUETOOTH. Select the amplifier and pair it. After pairing you can play the music
©Copyright 2016 LOTRONIC PAA150BT 8