Factory Reset; Software Update - auna Connect CD Bedienungsanleitung

View settings (View / Settings): view information about the currently connected network: active con-
nection, MAC address, W-LAN region, DHCP, SSID, IP address, subnet mask, gateway address, primary
and secondary DNS.
W-LAN region: select the appropriate region to get the best connection.
Manual setting: Choose between wireless and wired networks and enable / disable Dynamic Host
Configuration Protocol (DHCP)
Network profile: the device remembers the last 4 wireless networks it was connected to and will att-
empt to connect itself automatically to one of them if any are found. Here you can see the list of stored
networks. You may remove unwanted networks by selecting them, pressing select, and confirming de-
letion.
Keep network connected: enable this option to keep the Connect connected to WiFi in standby mode.
This allows the Connect to be ready for DLNA streaming even in standby mode.
Time/Date
Set the time manually or auto update, time format, time zone and daylight.
Language
The default language is English. Change it as your preference.

Factory Reset

A factory reset resets all user settings to default values, so that time and date, network configuration
and presets are lost. However, the unit's current software version is maintained, as is registration with
the Internet radio portal. Internet radio favourites therefore remain unless you re-register your unit with
another account on the portal website.

Software Update

From time to time, software upgrades may be created with bug fixes and/or additional features. You
can either check manually or set the unit to check periodically automatically (this is the default). If newer
available software is detected, you will be asked if you want to go ahead with an update. If you agree,
the new software is then downloaded and installed. After a software upgrade, all user settings are
maintained.
NOTE: Before starting a software upgrade, ensure that unit is plugged into a stable main power connec-
tion. Disconnecting power during an upgrade may permanently damage the unit.
30