Set Server Parameter Values - LevelOne FCS 1060 Benutzerhandbuch

10.1.2

Set server parameter values

Note: This request require administrator access
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/setparam.cgi? [nosync=<va-
lue>&]<parameter>=<value>
[&<parameter>=<value>...][&return=<return page>]
parameter
<group>_<name>.
return
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]
Only the parameters that you set and readable will be returned.
Example: Set the IP address of server to 192.168.0.123
Request: http://myserver/cgi-bin/admin/setparam.cgi?Network_IPAddress=192.168.0.123
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
value
value to assigned
<return page>
FCS-1060 IP-Kamera
10 Anhang
description
Assign <value> to the parameter
<group>_<name>..
Redirect to the page <return page>
after the parameter is assigned. The
<return page> can be a full URL
path or relative path according the
the current path. If you omit this
parameter, it will redirect to an
empty page.
(note: The return page can be a
general HTML file(.htm, .html) or a
server script executable (.vspx) file.
It can not be a CGI command. It can
not have any extra parameters. This
parameter must be put at end of
parameter list)
- 51 -