7.7
Video
7.7.1 General
Mirroring:
Vertical display:
Network frequency:
TRUE WDR (digital overlap):
Scenario:
7.7.2 Image
For many options, the possibility exists to apply different values for day and night modes. Switch
over accordingly during the configuration.
Horizontal: Horizontal mirroring (left/right)
Vertical: Vertical mirroring (up/down)
Horizontal & vertical: Horizontal and vertical mirroring
This setting rotates the image to increase the vertical angle of
view. It is necessary to rotate the camera module by 90° when
doing this.
NOTE: this function is only available in the TRUE WDR mode
OFF and 2X.
Here you can set the mains frequency of the power supply
network.
wide dynamic function for improved display of high contrasts.
Selection:
Off: deactivated
2X: 2x exposure, 2 images with different exposure times are
overlapped.
3X: 3x exposure, 3 images with different exposure times are
overlapped.
NOTE: the more images are overlapped, the more trailing
effects come into play in moving scenes. The WDR function
should only be enabled if the scene requires it.
These two indoor/outdoor options are used to configure certain
pre-settings for the two scenarios in the camera.
In the "outdoor" mode, additional filters are enabled for video
detectors to prevent the detection of flying leaves, for example,
as movement.
96