Taking Pictures Under Water; Underwater Shooting Modes - Olympus PT-EP14 Bedienungsanleitung

5. Taking Pictures Under Water

For details, see the instruction manual of the digital camera.
How to select the shooting modes
You can easily set the underwater mode by assigning
Macro) to Fn button of the digital camera.
Select /
button.
Memo:
• Press the Fn button to switch between Underwater Wide-Angle and Underwater Macro modes.
• When using the lens with electric zoom function, the wide-angle end and the telephoto end of the zoom is
automatically set in conjunction with the switching to
Macro).
• Turn the mode dial knob to temporarily exit the underwater mode. Press again the button you set for
(Underwater Wide-Angle)/
• Press and hold down the button you set for
to the original shooting mode.
• In iAUTO and movie modes, pressing the Fn button will not set the camera in underwater mode.
• In the (Underwater Wide-Angle)/
automatically set.

Underwater shooting modes

Underwater Wide-Angle
Suitable for shooting a scene that extends across a wide range such as a school of fish swimming
through the water. Background blues are vividly reproduced.
Underwater Macro
Suitable for close-up shooting of small fish and other underwater creatures. Natural colors of the
underwater are accurately reproduced.
EN
Operation sound of camera may be recorded when recording the movies.
Memo:
• When using the P, A, S, M modes, the
can be selected in each mode.
• When operating the electric zoom, assign electric zoom to the
by pressing the
Select [Electric Zoom] in [
EN 44
in [ Button Function]-[Fn1 Button Function] or [Fn2 Button Function], then press OK
(Underwater Macro) to return to the underwater mode.
, and buttons.
Button Function]-[
(Underwater Wide-Angle)/
(Underwater Wide-Angle) or
(Underwater Wide-Angle)/
(Underwater Macro) mode,
(under water white balance)/
or the
Button Function] or [
(Underwater
(Underwater
(Underwater Macro) to return
(Underwater White Balance)is
(under water picture mode)
buttons on the camera to operate
button], then press the OK button.