Dvd Operation; Before Operation; Release Front Panel; Load In Disc - ZENEC ZE-160DVD Bedienungsanleitung

Section
05

Before Operation

• Before applying laser disc operation,
please make sure monitor has been
properly connected to the unit.
• Audio output mode depends on the type
of discs and different disc has different
output mode, so carefully read the
description of disc before operation.

Release Front Panel

• Press [OPEN] button to put down the
front panel; please see sketch below for
the whole operation.
OPEN

Load in Disc

• Before inserting disc, make sure no disc
is in the unit. Please see eject button is lit
or not to confirm whether there is disc or
not.
• After disc load in, please close the front
panel in order to control playback.

DVD Operation

Eject
Eject

Eject Out Disc

• First press [OPEN] button to put down
the front panel. Then press [ @ ] button,
if a disc is in the unit, the disc will be
ejected.
Eject
Note:
• In DVD mode, unloading the disc will
make the unit automatically returning to
tuner mode.
• In standby mode, inserting the disc
will turn on the system power supply
automatically.
• After inserting disc, it will take some time
to start to playback.
• This player can playback 12cm disc only.
Don`t insert 8cm disc to the loading slot.
11