Beyerdynamic IMPACTO UNIVERSAL Bedienungsanleitung Seite 7

8
Battery pack for the Impacto universal
• The battery pack is used to extend the runtime
of the mobile player.
• When operating the Impacto universal with
iOS devices the use of the battery pack is
compulsory.
• Place the battery pack and the Impacto
universal together. Make sure that the contacts
are aligned with each other (see Illustration
1-4). Both parts are held together by magnets.
Important: The magnets that are installed in
the Impacto universal do not interfere with
the permanent magnets installed in the
headphones and therefore will not have any
negative effect on the sound quality.
Charging
• Charge the battery pack before using it for the
first time.
• You can charge the battery pack by inserting
one of the cables supplied into any live USB
port (e.g. USB charger).
• You must remove the battery pack from the
Impacto universal in order to charge it.
• Connect one end of the charging cable to the
battery pack (see Illustration 1-5) and the
other end of the charging cable to the USB
port.
• The LED on the battery pack (see Illustration
1-6) displays the current charging status:
LED is red Battery pack is charging
LED is white Battery pack is fully charged
LED is not Battery pack is not charging
illuminated
Warning and notice
1. Do not dismantle, open or shred the battery pack.
2. Do not short-circuit a battery.
3. Do not expose the battery pack to heat or fire, Avoid storage in direct sunlight.
4. Do not expose the battery to mechanical shock.
Impacto essential – High-end cable DAC & Amplifier
Illustration 1-4
Back of
Impacto universal
Contacts
Illustration 1-5
micro-USB port
for charging the battery pack
Illustration 1-6
Front of
battery pack
Contacts