Sony DXC-LS1P Bedienungsanleitung Seite 31

The following table shows the PAGE 3 menu items, their
contents and reference pages in this manual.
Item Contents of setting
BAR Selects the position to display the
color bar.
NEGA Negative/positive display of the
images.
OUTPUT Selects video output signal for the
12-pin connector.
BAUD RATE Selects the baud rate.
a)
SC PHASE Adjusts the difference in phase of
the subcarrier during external
synchronization.
SC 0/180 a) Adjusts the angle in phase of the
subcarrier.
H. PHASE a) Adjusts the difference in phase of
the horizontal synchronization
during external synchronization.
a)
Only displayed when an external video signal is input.
BAR
Selects where on the screen the color bar is displayed.
Ref. page Selection Function
31
FULL The color bar is displayed on the whole screen.
HI The color bar is displayed on bottom of the screen in
31
bigger size.
The color bar is displayed on bottom of the screen in
LOW
32
smaller size.
OFF The color bar is not displayed on the screen.
32
32
NEGA
Changes the normal image to a negative one. It is useful to
32
shoot a negative film.
32
Selection Function
ON The image is displayed as a negative.
OFF The image is not displayed as a negative.
31