Product Specifications; Packing List - Inateck FE3002 Bedienungsanleitung

Product specifications

Product name
Product type
material
Weight
Color
Supported drives interface
Supported of drives
Hot plug，plug&play
UASP
Licenses
Measurements
Supported OS

Packing list

Inateck FE3002 × 1
USB 3.0 data cable × 1
Power adaptor × 1
Instuction manual × 1
F&Q
a. Why cannot the hard drive with capacity over 2TB be identified?
When use a new hard drive, you must partition it. MBR(Master Boot Record) and
GPT(GUID Partition Table) are two different ways saving partition information. The
maximum hard drive capacity supported by MBR is 2TB. It cannot process the disk with
capacity larger than 2TB. GPT does not have such limit. Therefore, you will need replace
MBR with GPT on the computer.
b. Hard drive does not show up in "File Manager".
Disconnect the enclosure from your computer. Try another USB port on the computer.
If the problem still exists, the hard drive might need to reformat. You can use the
partition and formatting program that comes with system to do it（Right click
"Computer">Management>Disk Management）
2.5/3.5" Slide Cover HDD Enclosure
Inateck FE3002
ABS plastic
213g
black
SATA III，II，I
2.5"SSD/HDD or 3.5"HDD
Supported
Supported
CE，FCC
180x115x35mm
Windows XP/7/8/10；Mac9.0 or above；Linux
2