Operation Via Dmx Controller; Dmx-Protocol - EuroLite LED KLS-2500 Bedienungsanleitung

7.3 Operation via DMX controller

For operation with a controller with DMX512 protocol, the light set is equipped with 28 control channels.
However, it can also be switched to a mode with 2, 3, 4, 7, 20 or 23 channels if different functions are
required.
Setting the DMX starting address and the number of DMX channels
1
Adjust the number of DMX channels which are to be used for controlling the unit. For this press the
button MENU so many times until DMX Channel is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired value. Once again, press the ENTER
button to confirm your setting.
2
To be able to operate the light set with a DMX controller, the DMX starting address must be set for the
first DMX channel. For this press the button MENU so many times until DMX Address is indicated in
the display. Confirm with the ENTER button. Use the buttons UP and DOWN to set the address. Once
again, press the ENTER button to confirm your setting.
Note: The starting address depends upon which DMX controller is being used. Please refer to the controller's
documentation.
3
As soon as the light set receives DMX control signals, it switches to DMX operation; the display
indicates the number of control channels and the starting address. Now, the set can be operated with
the DMX controller.
DMX protocol
► 2-channel mode
Blackout, automatic mode, sound control, strobe control
DMX channel DMX value
000 – 015
016 – 089
1
090 – 164
165 – 240
241 – 255
000 – 000
2
001 – 255
► 3-channel mode
Preset programs, sound control, master dimmer, speed, microphone sensitivity
DMX channel DMX value
000 – 009
010 – 029
030 – 049
050 – 069
070 – 089
090 – 109
110 – 129
1
130 – 149
150 – 169
170 – 189
190 – 209
210 – 229
230 – 249
250 – 255
2 000 – 225
000 – 225
3
000 – 010
011 – 225
Function
Blackout
Slow automatic mode (program 0)
Medium-fast automatic mode (program 0)
Fast automatic mode (program 0)
Sound control
No function
Strobe slow → fast
Function
No function
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Program 0
Sound control
Dimming from 0 – 100 %
Running speed programs 0-11
slow → fast or
microphone sensitivity off
microphone sensitivity
low → high
33/40
00082823.DOCX, Version 1.0