Common Functions - Inateck BR1005 Bedienungsanleitung

Charging
The LED indicator will flash red if the battery level is low, which
indicates charging is necessary.
1. Plug the USB end of the charging cable to a USB charging port or
any active USB port (charging power: DC 5V).Connect the Micro
USB end of the charging cable to the charging port of the BR1005.
2. The LED indicator will turn red when charging.
3. The LED indicator will automatically turn off when the device is
fully charged. It takes up to 2.5 hours to fully charge the Bluetooth
adapter.
Note:
a. Poor quality power adapters do not provide a stable current ,
which may generate current noises when using.
b. To avoid battery over-discharge, please recharge the device once
a month if the device is not in regular use. Lithium-Ion batteries
continue to slowly discharge (self-discharge) when not in use or
while in storage.

Common Functions

1. Power On/Off
Press and hold the Multifunction Button for 3 seconds.
Power on: the LED indicator will blink blue.
Power off: the LED indicator will blink red and automatically turn off.
2. Automatically Pairing with Previously Paired Devices
BR1005 will enter pairing mode automatically when powered on for
the first time. BR1005 can remember previously paired devices and
will attempt to pair with devices automatically, without going into
pairing mode.
3. Quickly Enter Pairing Mode
Quickly double-click the Multifunction Button to enter pairing
mode after the BR1005 is powered on.
4. TX/RX Mode Switch
TX/RX mode can only be successfully switched after the adapter is
turned off for 5 seconds.
Note: turn off the BR1005 and restart it after 5 seconds if the mode
switch is not functioning properly.
2