LED DIMMER
Under TIME mode, short press DIMMER button to set LED lightness: highlight-
light-close. LED display is in light level by default.
While the Dimmer button under OFF mode, useless to press any button
RADIO
1) Extended press the POWER button to turn on/off the radio. It gets into FM radio
status by default, the FM lights on the LED screen as well.
a. Short press the TUN+ button to search upward station, extended press to speed
up.
b. Short press the TUN- button search downward station, extended press to speed
down.
c. Short press the VOL+ button to increase a volume level, extended press to
speed up increasing volume levels rapidly, totally 16 levels and it displays on the
LED screen.
d. Short press the VOL- button to decrease a volume level, extended press to
speed down decreasing volume levels rapidly, totally 16 levels and it displays on
the LED screen.
e. Under radio mode, short press "TUN +" or "TUN -" to return to the frequency
display.
2). Save Stations: Under radio mode, if you want to save stations, you must search
stations first, and then short press "Memory" button to select the station
number, LED screen shows "PXX" and then press "CH +" button or "CH- "key to
select the storage number, selected after a short press" Memory "button to
complete.
3). Take out station: under radio status, short press the CH + key to upward to take
out from P01-P20 units if you want to take out the saved stations; short press
"CH-" button to take out stations from P20-P01, LED screen shows the station
number and frequency every 3 seconds separately.
4). Search and save radio stations automatically: under radio status, extended long
press the SCAN button to search for radio stations automatically, it plays for 3
seconds when it get a station and then save it automatically. The LED screen
shows the station number and frequency every 3 seconds separately.
5). This product can store 40 stations(each 20 stations for AM & FM), back up
batteries for memory while power failure.
User's Manual
9
E N