Things To Know Before Printing - Sony UP-D6500 Bedienungsanleitung

Things to Know Before Printing

Confirm the following preparations have been
completed before printing a card:
• Connect the printer to a computer (page 17).
• If using the SCSI connection, set the SCSI ID (page
19).
• Install the ink ribbon (page 11), cleaning roller (page
13) and card tray (page 14).
• If you use an optional Auto Card Feeder (page 15) or
Auto Card Stacker (page 16), install these
accessories.
Note the following when handling cards:
• Hold cards by the edges, and avoid touching the
surface. Fingerprints on a card may cause dirty
printing or poor ink bonding.
• Soft cotton gloves are recommended when handling
large batches of cards.
• If using the optional Auto Card Feeder, fan the cards
thoroughly to ensure they do not stick together
before loading them into the Feeder.
• Do not store cards in a dirty place. Dirt on a card may
cause dirty printing or poor ink bonding.
• Insert cards with magnetic stripe so that the stripe
faces down and toward the rear.
Note the following when printing:
• Use an application program that supports the printer.
• Color adjustment of the printing image is
accomplished by the program.
• Print quantities are set by the program.
• When using cards with a magnetic stripe, set the
printing size to avoid printing onto the stripes. Even
if no actual image prints on the stripe it will be
laminated over if it is within the printing area, which
may cause later problems reading the strip.
21
Printing