Assembly And Operation - OK. OJU 102 Gebrauchsanweisung

ASSemBLy AND OpeRATION

Place the motor base on a flat surface. Insert the drive shaft.
1
Place the juice collector on the motor base.
2
Turn the juice collector leftward to lock it in place.
3
Place the juicing cone on the juice sieve.
4
Place the sieve on the collector.
5
6 Place the lid over the juicing cone.
The appliance is now ready for use.
preparing fruits
• Carefully clean citrus fruits before juicing.
• Cut the fruits into halves.
Getting started
Unwind the power cord from the cord storage underneath the base.
7
Run the power cord through the recess on the bottom of the motor base.
8 Place the base on a level, stable, dry and heat-resistant surface.
Remove the lid.
Connect the power plug to a suitable electrical outlet.
9
Press the fruit halve with one hand gently over the juicing cone.
10
Stabilise the appliance by holding the base with the other hand. When the pressing
cone is pressed down, the appliance switches on automatically and the juicing cone
starts to move and extracts the juice.
Once you have desired amount of juice, remove the sieve from the collector.
11
Turn the juice collector rightward to unlock it.
12
Then, remove the collector.
Pour the juice into a glass and enjoy.
13
Unplug the appliance and let it cool before cleaning and storage.
14
Tips:
• Empty the juice sieve regularly to avoid jamming.
• Ensure the juice collector does not overflow during use.
• During use, do not press the juicing cone too hard.
OJU102_140515_V03.indb 15
15
EN
5/15/14 11:54