Multimediacard And Rs-Mmc Card; Appendix; Safety Precautions; Cleaning The Unit - Sony UPA-PC700 Bedienungsanleitung

To write-protect an SD Memory Card
To protect important data from accidental erasure, SD
Memory Cards have a write-protect switch. When you
slide the write-protect switch as shown in the figure, data
can be read from but not written to the SD Memory Card.
Not write-
protected
Note
When write-protected, the SD Memory Card cannot be
used to store images taken with a digital camera.

MultiMediaCard and RS-MMC Card

A MultiMediaCard or RS-MMC card can only slide into
the slot on the unit in one direction. If the card does not
slide into the slot smoothly, do not force it. Instead, make
sure that the card is oriented correctly, as shown below.
Direction of insertion
Direction of insertion
For details, refer to the manual that came with the card.
Write-protect switch
Write-
protected
Notch
Notch

Appendix

Safety Precautions

• Operate the unit on 100 to 240 V AC, 50/60 Hz only.
• Be careful not to set or drop any heavy objects on the
power cord, or to damage the power cord in any way.
Never operate this unit with a damaged power cord.
• To disconnect the power cord, pull it out by the plug.
Never pull the power cord itself.
• To reduce the risk of electrical shock, always disconnect
the unit from the power outlet before cleaning and
servicing the unit.
• If any solid object or liquid falls into the cabinet, unplug
the unit and have it checked by qualified personnel
before operating it any further.
• If the unit will not be used for an extended period,
disconnect the power cord from the power outlet.
• The unit's touchscreen is made of glass. Take care not to
scratch or damage the touchscreen.
• Do not jar or drop the unit.
• Do not handle the unit roughly.
• Never disassemble the unit.
Condensation
If the unit is brought directly from a cold location to a
warm one or is placed in an extremely warm or humid
room, water droplets may form inside the unit. (This is
called "condensation.") Using the unit in this condition
could damage the unit or cause it to malfunction. If you
think that condensation may have formed inside the unit,
allow time for it to evaporate before using the unit.

Cleaning the Unit

• Before cleaning the unit, always turn off the unit and
disconnect the power cord from the power outlet.
• If the cabinet is dirty, soak a clean cloth in a solution of
water and neutral detergent, wring out the cloth
thoroughly, and wipe the surface of the cabinet. Then use
another clean, dry cloth to wipe the cabinet dry.
• If the surface of the display is dirty, soak a clean cloth in
a solution of water and neutral detergent, wring out the
cloth thoroughly, and wipe the surface of the display.
Then use another clean, dry cloth to wipe the screen dry.
• To avoid damaging the surfaces of the unit, never use
thinner, benzene, alcohol, or any other type of organic
solvent to clean the unit.
11
Appendix