Setting-Up Operation; Using The Radiocontrolled Socket; Using The Remote-Control - Silvercrest RC DS2 0201-A FR 3726 Bedienungs- Und Sicherheitshinweise

OFF button
3
will complete.
Prevent interference:
Ensure the various sockets are
spaced approx. 50 cm apart.

Setting-up operation

Q
Using the radiocon-
Q
trolled socket (fig. B)
1. Put the radio-controlled socket
into any shuttered socket and
connect the appliance you
want to operate.
2. Switch the electrical appliance
on. The radio-controlled socket
can only perform its switching
function when the device to be
controlled is switched on.
ATTeNTION! FIRe hAz-
ARD! Do not attach any appli-
Setting up / Setting-up operation
and the process ances which could cause fires or
other damaged if left unattend-
ed when switched on. The maxi-
mum load of every radio-con-
trolled socket is approx. 3,680 W.
Any overload could cause a risk
of fire or damage to the device.
Using the remote-
Q
control (fig. A)
1. Use the button ON / OFF
for the channel whose device
you would like to switch on or off.
The remote control controls up
to 4 radio-controlled sockets
(individually, in groups, or all at
the same time).
2. Use the ALL-ON / OFF button
to switch all radio-controlled
3
sockets on or off at the same
time.
2
GB 13