Daily Use; Activating And Deactivating; Powerboost - ZANKER KIT8470XXK Benutzerinformation

Residual heat indicator
Warning!
from residual heat. The indicators show
the level of the residual heat for the
cooking zones you are currently using.
The indicators may also come on for the
neighbouring cooking zones even if you
are not using them.

Daily use

Warning! Refer to Safety chapters.

Activating and deactivating

Touch for 1 second to activate or deactivate the
hob.
Automatic Switch Off
The function deactivates the hob automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate the
hob,
• you spill something or put something on the control
panel for more than 10 seconds (a pan, a cloth,
etc.). An acoustic signal sounds and the hob
deactivates. Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a saucepan boils
dry). Let the cooking zone cool down before you use
the hob again.
• you use incorrect cookware. The symbol
on and the cooking zone deactivates automatically
after 2 minutes.
• you do not deactivate a cooking zone or change the
heat setting. After some time
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
There is a risk of burns
comes on and the
The hob deactivates af-
ter
6 hours
5 hours
4 hours
1.5 hour
The induction cooking zones produce the heat
necessary for the cooking process directly in the bottom
of the cookware. The glass ceramic is heated by the
heat of the cookware.
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting or move
your finger along the control bar until you reach the
correct heat setting.
Automatic Heat Up
Activate this function to get a desired heat setting in a
shorter time. When it is on, the zone operates on the
highest setting in the beginning and then continues to
cook at the desired heating setting.
To activate the function the cooking zone
must be cold.
comes
To activate the function for a cooking zone: touch
( comes on). Immediately touch a desired heat
setting. After 3 seconds
To deactivate the function: change the heat setting.

PowerBoost

This function makes more power available to the
induction cooking zones. The function can be activated
for the induction cooking zone only for a limited period
of time. After this time the induction cooking zone
automatically sets back to the highest heat setting.
Refer to "Technical data" chapter.
To activate the function for a cooking zone: touch
. comes on.
To deactivate the function: change the heat setting.
comes on.
7