Set The Video Format According To System, Ex-Sdi Or Hd-Sdi; Osd Menu Startup - Eneo HDB-2280Z10IR D Schnellinstallationsanleitung

4. ► : Focus Far

Set the video format according to system, EX-SDI or HD-SDI

To select the camera's output video format (EX-SDI or HD-SDI), use the Video format
Switch on the side of the camera. Only one format can be used at a time (see also "Using
OSD controller").
Camera (HD-SDI)
1M~120M via
RG59u or 5C2V
cable
Camera (HD-SDI)
1M~120M via
RG59u or 5C2V
cable
Camera (HD-SDI)
Camera (EX-SDI)
Camera (EX-SDI)

OSD menu startup

Press '●' (OSD menu Joy stick key) down to access the setup menu mode.
• EXIT : Exits the setup menu without save.
• SAVE : Saves the menu settings.
• DFLT : Reset to the factory defaults.
• BACK : Go back to the previous menu.
10
1M~120M via RG59u or 5C2V cable
1M~120M via RG59u or
5C2V cable
HDA-3000E
(HD-SDI)
350M+ via RG59u or
5C2V cable
HDA-3000E
(EX-SDI)
350M+ via RG59u or 5C2V cable
350M+ via RG59u or 5C2V cable
1M~120M via
RG59u or 5C2V
cable
HDA-3000E
(HD-SDI)
1M~120M via
RG59u or 5C2V
cable
HDA-3000E
(EX-SDI)
1M~120M via
RG59u or 5C2V
cable
HDA-3000E
(EX-SDI)
DVR (HD-SDI)
DVR (HD-SDI)
DVR (HD-SDI)
DVR (HD-SDI)
DVR (EX-SDI)