Controls - Winix Tower Qs AGN335-WE Anleitung

CONTROLS

Air Outlet Vent
Mode Button
- Press to cycle through manual fan speeds (Low, Medium, High, Turbo).
- Pressing will also cycle through Auto and Sleep Modes.
- When sleep mode is selected the Air Quality Indicator light will be turned off.
- Press and hold for at least 3 seconds to enable or disable PlasmaWave
Reset Button
After replacing a filter,
press the RESET button
for at least 5 seconds.
Light Sensor
Detects the
amount of
ambient light
within the
Power Button
environment,
Turns the unit
to adjust the
on or off.
brightness
of the LED
indicators.
English
Bluetooth indicator
Indicator is lit
when Bluetooth
is connected.
Change Filter Indicator
LED light indicates when it is time to
change the filter.
Air Quality Indicator
Color-coded LED indicates
one of three levels of air
quality.
PlasmaWave Indicator ®
Indicates whether
PlasmaWave is enabled or
®
disabled.
Bluetooth button
Turns Bluetooth
connection
ON / OFF
AGN335 Series
®
.
4