Zanussi ZHC4284 Benutzerinformation Seite 18

tion paragraph).
Drilling the Ceiling/Support Shelf
• Use a plumb line to mark the centre of the hob on
the ceiling/support shelf.
• Place the drilling template 21 provided on the ceiling/
support shelf, making sure that the template is in the
correct position by lining up the axes of the template
with those of the hob.
• Mark the centres of the holes in the template.
• For concrete ceilings, drill for plugs appropriate to
not provided).
• For wooden beam ceilings, drill according to the
wood screws used.
• For the air outlet (Ducted Version), drill according
to the diameter of the external air exhaust duct
connection.
• Insert two screws of the following type, crossing them
• For concrete ceilings, use the appropriate plugs
• For Cavity ceiling with inner space, with wall thi-
• For wooden beam ceilings, use 4 wood screws
(not provided).
• For wooden shelf, use 4 screws with washers and
nuts (not provided)
GB
INSTALLING THE COOKER HOOD
-
18