Features - Sony WRT-805A Bedienungsanleitung

Features

Phase Locked Loop (PLL) synthesized system
The WRT-805A has a refined phase locked loop (PLL)
systhesizer circuit.
Preprogrammed wireless channel plans for simultaneous
multichannel operation
The WRT-805A has many preprogrammed channel groups,
meaning combination of wirelss channels to permit
simultanous operation of multiple channels without
intermodulation.
Any available group and channel can be selected with a
simple button operation.
Compact and lightweight
Innovative high-density mounting technology has enabled
the creation of this compact and lightweight transmitter,
which lets you move anywhere for Electronic News
Gathering (ENG) and Electronic Field Production (EFP).
The curved design of the moulded case allows a comfortable
fit to your waist.
Remote battery alarm on tuner
This transmitter has capability of transmitting "Battery
status information" to the WRR-800A/801A to give advance
warning of battery depletion.
The information is sent to the WRR-800A/801A in approx.
1 hour advance to battery exhaust so that they can safely
replace battery of the transmitter.
When the WRR-800A/801A receives the information, the
LED and the LCD on the panel start flashing.
Operation powered by easily available battery
The built-in high efficiency DC-DC converter allows stable
operation, for about 6 hours continuously, with just a single
LR6 (size AA) alkaline battery.
LCD for coordinated operation control
The LCD shows the current channel number, the residual
battery power, input attenuation setting, AF input level and
RF output.
An accumulated operation time indication is also provided for
simple control of the time of battery use (in 1-minute increments).
Saved channel and input attenuation settings
The unit stores the channel and the input attenuation setting
when it is turned off. The saved settings are retained even if
the battery is removed. Therefore, when using the unit next
time, you need not make the same settings again.
Highly reliable electronic attenuator
The built-in input level attenuator is adjustable in a range of
0 to 21 dB in 3-dB steps. It reduces signal distortion when
an excessively strong audio signal is inputted.
EN
3