Getting Started; Quick Set Up - PURE Evoke F3 Betriebsanleitung

Getting started

Quick set up

1
• Unclip the aerial and fully extend it (steps A and B).
• Insert the jack of the supplied mains adapter into the socket on the rear of the radio (C).
• Plug the mains adapter into the mains supply (D).
AUX IN
2
Press the Standby button to switch Evoke on.
3
The first time you switch on Evoke you will be asked if you would like to run the setup wizard,
which will help you connect Evoke to your Wi-Fi. If you want to run the setup wizard now, turn and
press the Select dial to select 'Yes' and follow the prompts on screen. To set up Evoke later, turn
and press the Select dial to select 'No'.
Note: For more information on using the setup wizard see page 15.
8
B
A
Evoke F3
with Bluetooth
Model Evoke F340BT
Input: 12V DC
LINE OUT
12V DC
Aux Speaker
Setup wizard
Start now?
YES NO
Evoke F3
with Bluetooth
Model Evoke F340BT
Input: 12V DC
Stereo Out
AUX IN LINE OUT
C
D