FALMEC 110030284 Bedienungsanleitung Seite 28

Remote motor positioned in a technical compartment protected against at-
mospheric agents inside the residence: define the type of output
- Rectangular output of 90x220 mm (fig. 6). Remove the FC flange fixed on the range hood and
assemble the flange for FR rectangular pipe (optional). Install UM in the wanted position.
- Circular output diam 150 mm (fig 7). Verify that the FC flange is assembled on the range hood.
Install UM in the wanted position.
- In case of installation with remote motor, connect the range hood body to the electrical sy-
stem earthing (after having verified its functioning), by means of suitable cable. It is advised
to comply with the current regulations on electrical safety of the systems and of the devices
for the earthing of the equipment.
- Follow the instruction in previous paragraph, starting from point 2.
- Comply with current regulations for air discharge.
26