Disposal; Packaging - Abicor Binzel BRS-LCi SPS Betriebsanleitung

BRS-LCi PLC

12 Disposal

To correctly dispose of the product, it must first be disassembled. When disposing of the system, local
regulations, laws, provisions, standards, and guidelines must be observed.
 11 Disassembly on page EN-26
12.1 Materials
This product is mainly made of metallic materials, which can be melted in steel and iron works and are thus
almost infinitely recyclable. The plastic materials used are labeled in preparation for their sorting and
separation for later recycling.
12.2 Consumables
Oil, greases, and cleaning agents must not contaminate the ground or enter the sewage system. These
substances must be stored, transported, and disposed of in suitable containers. Please observe the relevant
local regulations and disposal instructions in the safety data sheets specified by the manufacturer of the
consumables. Contaminated cleaning tools (brushes, rags, etc.) must also be disposed of in accordance with
the information provided by the consumables' manufacturer.

12.3 Packaging

ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.
12 Disposal
EN - 27