Zanussi ZRB934FW2 Benutzerinformation Seite 35

C
B
A
D
Doors
• Remove the plugs (A) on the top side of both
doors and move them to the opposite side.
• Re-insert the bottom door on the bottom
hinge pivot (B).
• Insert the middle hinge (B) into the left hole
of the bottom door.
A
Top Hinge
• Unscrew the top hinge pivot (1) and place it
on the opposite side (2).
2
1
• Fit the top door on the top door pivot, and
bottom door on the bottom hinge pivot.
www.zanussi.com
• Re-insert the middle hinge pivot (B) into
bottom and top door pivot holes, slightly tilt-
ing both doors.
2
1
3
2
1
• Re-screw the middle hinge (B). Do not
forget the plastic spacer (A).
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to the
side edge of the appliance.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Win-
ter), the gasket may not fit perfectly to the cabi-
net. In that case, wait for the natural fitting of the
gasket.
In case you do not want to carry out the above
mentioned operations, contact the nearest After
Sales Service Force. The After Sales Service
specialist will reverse the doors at your cost.
3
35