Description Of The Device - Stylies TITAN Gebrauchsanweisung

DESCRIPTION OF THE DEVICE

The device consists of the following main components (please see inside cover):
1. Mist outlet
2. Water tank lid
3. Display / controls
4. Base
5. «Low water warning»
6. «Preheating signal»
7. Air humidity, e.g. «36 %RH»
8. «Air humidity display»
9. On/Off switch
10. Adjustment «+»
15. Water tank handle
16. Water tank
17. Base
18. Descaler cartridge with tank lid
19. Tank lid
20. Descaler cartridge
21. Power cable with Hygrostat sensor
22. Cleaning brush in holder
23. Preheating
STARTING UP / QUICK GUIDE
This quick guide helps practised users to start the device in a few steps. For detailed start-up
instructions, please consult the next chapter.
1. Place the humidifier on a stable and watertight surface, never
on a carpet or parquet floor.
2. Remove the water tank (2). Hold the water tank firmly by the
handle (15) and pull it upward.
3. Turn the tank upside down. Unscrew and remove the tank lid
(18).
4. Fill the tank with no more than 5.5 litres (1.45 US gallons) of
cold fresh water.
14
11. Preheating adjustment
12. Adjustment «–»
13. Air humidity setting (40-75 %) or
«Co» (= Continuous operation)
14. «Timer» adjustment for automatic
shutdown
24. Water collector
25. Ultrasonic membrane. Do not touch:
danger of burning
26. Water level sensor
27. «Silver Cube»
1./8.
3.