Sony TA-ZH1ES Bedienungsanleitung Und Sicherheitsmaßnahmen Seite 7

Specifications
Section for headphone amplifier
PHONES (headphones) section
Rated power output
BALANCED: 1,200 mW + 1,200 mW (32 Ω,
THD 1%)
Frequency characteristics
BALANCED: 4 Hz - 80 kHz (-3 dB, D.C.PHASE
LINEARIZER OFF)
Playing frequency range
BALANCED: 4 Hz - 200 kHz (D.C.PHASE
LINEARIZER OFF)
Supported impedance
Area Supported impedance
U.S.A. and 12 Ω - 600 Ω
Canada
Other countries/ 8 Ω - 600 Ω
regions
Input section
USB-B section
Supported format
PCM 2ch: 44.1/48/88.2/96/176.4/192/352.8/
384/705.6/768 kHz (16/24/32 bit)
DSD 2ch: 2.8/5.6/11.2/22.4 MHz (1 bit)
WALKMAN port (for WALKMAN®/Xperia™
connection) section
Supported format
PCM 2ch: 44.1/48/88.2/96/176.4/192/352.8/
384 kHz (16/24/32 bit)
DSD 2ch: 2.8/5.6/11.2 MHz (1 bit)
COAX (coaxial) IN section
Input impedance
75 Ω
Supported format
PCM 2ch: 32/44.1/48/88.2/96/176.4/192 kHz
(16/24 bit)
OPT (optical) IN section
Supported format
PCM 2ch: 32/44.1/48/88.2/96 kHz (16/24 bit)
LINE IN L/R section
Maximum input voltage
2 Vrms
Input impedance
50 kΩ
Pre-out section
PRE OUT L/R section
Output voltage
2 Vrms (Fixed)
Output impedance
100 Ω
General
Power requirements
Area Power requirements
U.S.A., Canada 120 V, 50/60 Hz
and Taiwan
Other countries/ 220 V - 240 V, 50/60 Hz
regions
Power consumption
35 W
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (including projecting parts)
Approx. 210 mm × 65 mm × 314 mm 
(8.27 in × 2.56 in × 12.37 in)
Mass
Approx. 4.4 kg (9.7 lb)
Design and specifications are subject to
change without notice.
GB
7 GB