CHANGES AND IMPROVEMENTS
Nilfisk constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessory must be approved and performed by Nilfisk.
OPERATION CAPABILITIES
These scrubber-dryers are designed to clean (scrubbing and drying) smooth and solid floors, in commercial or industrial
environment, under safe operation conditions by a qualified operator.
The scrubber-dryers cannot be used for fitted carpet and carpet cleaning.
CONVENTIONS
Forward, backward, front, rear, left or right are intended with reference to the operator's position, that is to say in driving position
with the hands on the handlebar (1).
UNPACKING/DELIVERY
To unpack the machine, carefully follow the instructions on the packing.
When the machine is delivered, check that the packing and the machine were not damaged during transportation.
In case of visible damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill
in a damage claim.
Please check that the following items have been supplied with the machine:
–
Technical documents:
•
Scrubber-dryer Instructions for Use Manual
•
Scrubber-dryer Spare Parts List
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents are caused by failure to comply with the
simplest rules for exercising prudence.
VISIBLE SYMBOLS ON THE MACHINE
WARNING!
Carefully read all the instructions before performing any operation on the machine.
WARNING!
Do not wash the indicated area with direct or pressurized water jets.
WARNING!
2%
Do not use the machine on slopes with a gradient exceeding the specifications.
09/2017
INSTRUCTIONS FOR USE
9100002292 - SC401, SCRUBTEC 344
ENGLISH
3