Control Panel and Features
1
1
SOIL LEVEL
1
Soil Level settings adjust the agitation time as needed for
your load. The Light setting is for lightly soiled garments and
the Heavy setting is for garments that need a longer wash
time to release the soils from the fabric.
WASH TEMP
2
Temperature Control senses and maintains uniform water
temperatures by regulating incoming warm and cool water.
This ensures the correct temperature is used to maximize
cleaning while protecting the garments.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
NOTES:
• The temperature of hot and cold water depends upon
the temperature of the water entering your washer.
• Warm and cool water will be cooler than what your
previous washer provided.
• Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
4
2
3
2
Not all features and options are available on all models.
Appearance may vary.
4
6
5
DEEP FILL (on some models)
3
Set at "Yes" to add extra water to any cycle. Water will be
added automatically, with the amount determined by the size
of the load.
NOTE: Washer will continue to operate with agitation even
as water is added.
WASH CYCLE KNOB
4
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
START/STOP/PAUSE/UNLOCK LID BUTTON
5
• Press to start the selected cycle.
• Press again to pause the cycle and unlock the lid.
• Press and hold for 3 seconds to cancel a cycle.
NOTE: If the washer is spinning, it may take several
minutes to unlock the lid.
Use to Manually Soak Garments:
Press START/STOP/PAUSE/UNLOCK LID and keep the lid
closed. After items have soaked for the desired time, press
START/STOP/PAUSE/UNLOCK LID to resume the wash
cycle.
4
5
6
7
8