Zanussi ZDT26050FA Benutzerinformation Seite 7

1. Press .
• The indicators
• The indicator
• The display shows the current setting: e.g.
= level 5.
2. Press to change the setting. Each pressing
of the button
one. After reaching level 10, the count starts
again from level 1.
3. Press the on/off button to confirm the setting.
THE WATER HARDNESS TABLE
German degrees
(°dH)
47 -50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting
2) Do not use salt at this level.
DEACTIVATING THE RINSE AID EMPTY
NOTIFICATION
Make sure the appliance is in user mode.
1. Press .
• The indicators
• The indicator
• The display shows the current setting:
– = the rinse aid empty notification
is activated.
– = the rinse aid empty notification
is deactivated.
2. Press to change the setting.
3. Press on/off button to confirm the setting.
, , and
still flashes.
increases the level number by
French degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
, , and
still flashes.
If you use multi-tablets containing salt
and the hardness of your water is
are off.
lower than 21°dH, you can set the
lowest water softener level. It
deactivates the salt refill indicator.
If you use standard detergent or
multitablets without salt, set the proper
water hardness level to keep the salt
refill indicator active.
mmol/l
8.4 - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
When rinse aid chamber is empty, the
rinse aid indicator is turned on
notifying to refill rinse aid. If the drying
results are satisfactory while using
multi-tablets only, it is possible to
are off.
deactivate the notification for refilling
rinse aid. However, for the best drying
performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
HOW TO SET THE RINSE AID LEVEL
Make sure the appliance is in user mode.
Clarke degrees
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Water softener
level
10
9
8
7
6
1)
5
4
3
2
2)
1
7