Technical Data; Guarantee - AEG L6TB61379 Benutzerinformation

26 www.aeg.com
Problem
After the washing cycle,
there are some deter-
gent residues in the dis-
penser drawer.
After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes. Deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.

14. TECHNICAL DATA

Dimension
Electrical connection
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture
Water supply pressure
Water supply
Maximum Load
Energy Efficiency Class
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
15.

GUARANTEE

CH
Customer Service Centres
Possible solution
• Make sure that the flap is in the correct position (left for
powder detergent - right for liquid detergent).
• Make sure you have used the detergent dispenser accord-
ing the indications given in this user manual.
Width/ Height/ Depth/
Total depth
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
1)
Cotton
Maximum
Industriestrasse 10
5506 Mägenwil
400 mm/ 890 mm/ 600 mm/ 600 mm
230 V
2200 W
10 A
50 Hz
IPX4
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Cold water
7 kg
A+++
1300 rpm
Point of Service
Le Trési 6
1028 Préverenges
Via Violino 11
6928 Manno