Characters Used In Illustrations; About This Documentation; English - Hilti PD-CS Bedienungsanleitung

1 Information about the documentation
1.1 Explanation of signs used
1.1.1 Warnings
Warnings alert persons to hazards that occur when handling or using the
product. The following signal words are used in combination with a symbol:
DANGER! Draws attention to imminent danger that will lead to seri-
ous personal injury or fatality.
WARNING! Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION! Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the equipment or
other property.
1.1.2 Symbols
The following symbols are used:
Read the operating instructions before use.
General warning
Laser radiation. Do not stare into the beam. Class 2 laser in accor-
dance with IEC/EN 60825- 1:2007

1.1.3 Characters used in illustrations

The illustrations in these operating instructions are intended to promote a
better understanding and may deviate from the actual version of the product.
These numbers refer to the corresponding illustrations found at the
beginning of these operating instructions.
The numbering in the illustrations reflects the order of the work steps
in the illustration and may deviate from the numbering of work steps
in the text.
Item reference numbers are used in the overview illustration and
refer to the numbers used in the product overview section. In the
product overview section, the numbers shown in the legend relate to
these item reference numbers.

1.2 About this documentation

▶ Read these operating instructions before the product is used or operated
for the first time. This is a prerequisite for safe, trouble-free handling and
use of the product.
▶ The information provided in the detailed operating instructions in-
stalled in the tool as well as the supplements and updates provided at
www.hilti.com must also be observed.

English

15