Axis 243Q Blade Installationsanleitung Seite 5

AXIS 243Q Blade Installation Guide
LED Indicators
Network
Green
Status
Green
Red
Green/red
Power
Green
Green/Amber Flashes for unit upgrade
AXIS 291 1U Video Server Rack
I/O Terminal
Power
Connector 3
Connector
Power Connector - Input power: 100-240V AC, 50-60 Hz, 1.9A
I/O Terminal Connector(s) - provides the physical interface to 1 output and 1 input for each
video input. Video input 1 on each blade also provides an RS-485 interface, usually used for
connecting Pan Tilt Zoom devices.
Power & Network LEDs - The 10/100 LED flashes red for 10 Mbps, and flashes green for 100
Mbps. The 1000 LED flashes green for 1 Gbps. The power LED shows steady green when the
rack has power.
Network Connector - Axis blade video servers are designed for 10/100/1000 Mbps networks
and connect via the standard RJ-45 connector.
Steady green - no network activity
Flashes green - network activity
Steady green - normal operation
One flash - one or more units starting up
Two flashes - a unit is resetting to factory default settings
Steady red - hardware error on one or more units
Flashes for no connection to AXIS Internet Dynamic DNS Service
Normal operation
I/O Terminal
Connector 2
I/O Terminal Power &
Connector 1 Network LEDs
Page 5
Network
Connector