Grundig FineArts MR 8000 Bedienungsanleitung Seite 30

CONNECTION
Subwoofer_Connection
Make sure the AC power cord is con-
nected to a power supply securely.
press source button to switch AUX
mode,press and hold favourite button
and the sound base will scroll display
SUB PAIRING on the display screen,
then press and hold pair button on the
subwoofer to pair with the sound bar.
when the red indicator flashing on the
subwoofer , the subwoofer is in pair-
ing status, when the sound base scroll
display PAIR OK and the red indica-
tor on the subwoofer keeps lighting
means pair successfuly ,if the sub-
woofer can not pair with the soundbase
automatically,the sound base will scroll
display PAIR FAIL,please press and
hold pair button on the rear panel of
subwoofer and press and hold favou-
rite button on the sound base to repair .
The subwoofer will memories the sound
base and connected automatically
when you power off the subwoofer then
power on.
REAR PANEL
OF THE SUBWOOFER
红 色区 域 高光(斜线 花纹做 细纹)
30 ENGLISH
_ _____________________________________________
SUBWOOFER
AUX_IN
This sound base has an extra group of
audio input terminals. You can input
the analogue stereo audio signals from
extra devices such as VCD, CD, VCR,
DVD player, etc.
Use the audio cable to connect the ste-
reo audio output terminals of a VCD,
CD, VCR,DVD player to the stereo input
terminals AUX IN of this .
Its corresponding signal source is AUX
IN which can be available by press-
ing [SOURCE] button on the remote
control.
Coaxial_Input
Use the coaxial cable to connect the
coaxial input of this sound base to the
coaxial output of VCD, CD, VCR, DVD
player.
AUX Input
A UX I N
AUX Output
Coaxial Input
COAXIAL
Coaxial Input