Klarstein 10030683 Handbuch Seite 32

EN
32
When the time is set, it will begin to count down
immediately, the display will show the remaining time.
NOTE: The red dot next to power level indicator will
illuminate for those zone set with timer. You can check
4
timer setting of different cooking zone which set with
timer, by press corresponding cooking zone select
button.
NOTE: If more than one heating zone has timer setting,
the timer indicator will show the lowest time. The red
dot next to power level indicator will flash.
When cooking timer expires, the corresponding
5
cooking zone will be switch off automatically.
• To change timer setting set, follows the step 1 to step 3 above. To cancel timer
setting, you can adjust timer setting to 0 (indicator shows "--").
• The default setting of the timer is 30 minutes.
• The timer setting will be canceled if hob be turn off.
• The minute reminder and timer can be use at same time, the timer indicator will
show the lowest time setting. If the lowest setting is minute reminder, the red dot
next to timer indicator will flash. If the lowest setting is timer setting, the red dot of
corresponding cooking zone power level indicator will flash.
• If indicator shows lowest time, which is timer setting of cooking zone. To check
minute reminder setting, press the timer control button, the indicator will show
minute reminder setting.
Note: If there is power cut off during cooking, all programmer setting will be
cancelled, you need to reset the programmer again.