Declaration Of Conformity; Disposal; Guarantee - Olympia A 350 Combo Bedienungsanleitung

Removing Deposits and Residual Adhesive
Adhesive and other residues on the rollers can impair the lamination result. Remove these at
regular intervals and whenever the lamination result is not as good as expected.
1
Switch the On/Off switch to on. The drive motor for the rollers starts up.
2
Set the function switch to hot. Pay attention to the warm-up time stipulated in "Technical
Data".
3
Fold a sheet of paper and feed it into the laminator with the folded edge first and keeping it
straight. Residual adhesive is removed and taken up by the paper when ejected.
4
Repeat the process with a new sheet of paper until the paper comes out clean.
Regular Cleaning
Clean the laminator at regular intervals.
1
Before cleaning, disconnect the plug from the power socket.
2
Use a damp, lint-free cloth to clean the surface of the laminator. Do not use any solvents or
cleaning agents

Declaration of Conformity

The CE mark on the device confirms conformity. To view the complete Declaration of
Conformity, please refer to the free download available on our website www.olym-
pia-vertrieb.de.

Disposal

In order to dispose of your device, take it to a collection point provided by your
local public waste authorities (e.g. recycling centre). According to laws on the
disposal of electronic and electrical devices, owners are obliged to dispose of old
electronic and electrical devices in a separate waste container. The symbol
indicates that the device must not be disposed of in normal domestic waste! Packaging materials
must be disposed of according to local regulations.

Guarantee

Dear Customer,
we are pleased that you have chosen this equipment.
In the case of a defect, please return the device together with the receipt and original packing
material to the point-of-sale.
20