Missed Call(S); Precaution - Marmitek 210 Gebrauchsanleitung

9.11 Missed call(s)

Under the circumstances of an unanswered call from
a visitor (e.g. you are away from home), the missed
call indicator will start flashing in standby mode. At
the same time, the text "X MISSED CALL(S)" will be
shown at the bottom part of the screen (18)
whenever it is woken up (X represents the total
number of missed calls, the maximum number of
missed calls that can be stored is 10, with the most
updated entry overriding the oldest entry).
Short press the Talk/answer button
initiate the screen (18). Short touch the missed calls
key (14) to show the 1st image, touch again will
show the subsequent images until after the last
recorded image, the screen (18) will prompt you if
you prefer to delete the images, use the left/right key
(9) (10) to select and the menu key
confirm. In case NO is selected, the missed calls
indicator will continue to flash until all stored images
are deleted.

9.12 Precaution

x
Use only the supplied AC switching power supply for charging the
handset. Use of another supply may cause damage to the handset.
x
Do not mix old and new alkaline batteries in the door unit.
x
When not using the Video DoorPhone 210 for a long period of time,
remove all batteries from the handset and the door unit to avoid
battery leakage.
x
Do not leave the handset exposed to strong sunlight for a long period
of time or near any heat source, moisture and an excessive dusty
environment.
x
Do not open the cabinet; no serviceable parts are inside.
x
When using for the first time, switch off the handset and charge up
the supplied battery pack for 4 – 5 hours using the charger stand.
Video DoorPhone 210
/ (16) to
(11) to
17