Installation And Adjustment; Tools; Manner Of Delivery; Adjusting The Seat Height And Seat Angle - Vermeiren V500 Gebrauchsanweisung

3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren V500 has been designed to be adjust with a minimum of replacements parts.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1

Tools

To set up the wheelchair the following tools are needed.

Wrench set n° 10 to n° 22

Allen keyset n° 4 to n° 6
3.2

Manner of delivery

The Vermeiren V500 shall be delivered with:

1 frame with armrests, rear and front wheels (standard delivery
seat height: 500 mm, seat angle: 5°)

1 pair footrests

Tools

Manual

Accessories
3.3

Adjusting the seat height and seat angle

The Vermeiren V500 is adjustable in 4 seat heights and 5 seat angles (0°-2,5°-5°-7,5°-10°)
by changing the position of the wheels for each height and angle there is a different setting
of the front and rear wheels.
The summary of the different seat heights by a standard seat angle 5° is tabulated below.
Seat height
440 mm
470 mm
500 mm (Standard)
530 mm
Rear
wheels
Hole Hole
 
 
 
 
Table 2: Seat heights by seat angle 5°
Page 15
Front wheels
Ø
Bushing
castor stem housing
150 mm
150 mm
150 mm
200 mm
V500
2016-07
Ⓑ
relative to
Ⓒ
Above
Under
Under
Under