For Products Using Water Carboy - Grundig GSBS11120X Bedienungsanleitung

1.
Detach the connector (1) from
the faucet adaptor (2).
3
2
3
2.
Connect the faucet adaptor to
the water mains valve.
3.
Attach the connector around
the water hose.
1
2
1
4.
Attach the connector into the
faucet adaptor and tighten by
hand / tool.
5.
To avoid damaging, shifting
or accidentally disconnecting
the hose, use the clips
provided to fix the water hose
appropriately.
A
WARNING:
the faucet on, make sure
there is no water leak on
either end of the water
hose. In case of leakage,
turn the valve off and
tighten all connections
using a pipe wrench or
pliers.
3.8. For products using
water carboy
(Optional)
To use a carboy for the product's
water connection, the water pump
recommended by the authorized
service must be used.
After turning
DK
SV
NO
FIN
IT
HR
FL
FR
15