Ikra IBRM 40-Z130 Originalbetriebsanleitung Seite 29

FAILURE REMOVAL
Cause
Defect
Engine does not start or
Wrong starting process.
starts, but does not run
further.
Empty fuel tank/Lack of fuel
Wrong fuel, storing without petrol tank
being drained
Wrong setting of the carburettor.
Sooted spark plug (carbon residues on elec-
trodes), electrodes distance too big.
The spark plug is wet from petrol (oversatu-
rated engine).
Dirty air filter
Engine starts, but does Dirty air filter
not run at full power.
Wrong setting of the carburettor.
Engine splutters. Dirty air filter
The motor does not de-
velop maximum power
Engine does not run Wrong setting of the carburettor.
smoothly.
Excessive exhaust gases
(smoke).
Unsteady running, Blade is damaged
strong vibrations
Blade is loose
Poor mowing/catching Blade is blunt
performance
Collection bag is blocked
Mowing height adjustment not regulated
Grass is not collected Blocked channel
Full collection bag
Too wet grass
Removal
Refer to the instructions in these operating
instructions.
Add some fuel
Drain the fuel tank and carburettor. Add
fresh petrol.
Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Clean the spark plug, check the plug thermal
value, possibly change the plug.
Dry the spark plug out and refit it.
Clean or replace the air filter
Clean or replace the air filter
Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Clean or replace the air filter
Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Replace the blade
Check and tighten the blade clamping
Have the blade sharpened or replaced
Empty the collection bag
Adjust the mowing height
Clean the ejection channel
Empty the collection bag
Cut in dry weather
EN
ENGLISH
27