Safety Instructions - Trisa Electronics Nutri Bedienungsanleitung

Safety instructions

EN • Mains connection: The voltage must comply with that shown on the appliance label.
• Always switch off the device and plug out the power cable whenever you leave it unat-
tended, before assembling / disassembling, cleaning, when it fails to work properly, after
use. The plug must be within reach at all times.
• Regulary check if the power cable / appliance / extension lead is defective. Never switch on
damaged appliances (incl. mains lead) – have repairs carried out / obtain replacement
from the manufacturer, the manufacturer's service point or from qualified experts. Never
open the appliance yourself – risk of injury!
• Don't pull the flex over sharp edges. Don't wedge it. Don't bend it. A short circuit can occur
if the cable breaks. Never pull on the mains cable / with damp hands.
• Switch the appliance off and pull the plug out of the mains when it is not in use. Don't
wind the flex around the appliance.
• Never immerse appliance in water / other fluids. Danger of short-circuiting!
• People with limited physical, sensory or mental abilities, and insufficient knowledge and
experience should only be allowed to use, clean or maintain the appliance if supervised by
someone responsible for their safety or if they have already been shown how to use the
appliance safely and have understood the risks involved.
• This appliance shall not be used by children. Children should not be allowed to play with
the appliance. Keep the appliance and its cord out of reach of children.
• Keep packaging (e.g. plastic bags) away from children.
• Never leave the appliance unattended while in operation.
• Never place the appliance / cable on hot surfaces or near open flames. Do not store / expose
the appliance to intense heat (from radiators, prolonged sunshine). Only extinguish burn-
ing appliances using a fire blanket.
• Do not use attachments not recommended / sold by the manufacturer.
• The appliance is designed for household use and not for industrial operation. Do not
operate the appliance outdoors.
• Use the appliance on a dry, even, stable and heat resistant surface. Allow appliance to cool
before storing away.
10