Special Accessories - Kärcher GP 60 MOBILE CONTROL Originalbetriebsanleitung

The figures of the following special accessories can be found on page 4 of these instruc-
tions.
6.997-350.0 Suction assembly,
3.5 m
6.997-349.0 Suction assembly,
7.0m
6.997-348.0 Suction hose 3.5m
6.997-347.0 Suction hose, by the
meter, 3/4" (19 mm)
25 m
6.997-346.0 Suction hose, by the
meter, 1" (25.4mm)
25 m
6.997-345.0 Suction filter Basic
3/4"(19 mm)
6.997-342.0 Suction filter Basic
1"(25.4 mm)
6.997-341.0 Suction filter Premi-
um
6.997-344.0 Prefilter (flow up to
6,000 l/h)
6.997-359.0 Pump connection
piece G1 (33.3 mm)
6.997-358.0 Connection kit Basic
G1 (33.3 mm)

Special accessories

Complete, ready to connect, vacuum-tight suction
hose with suction filter and backflow preventer. Can
also be used as an extension for the suction hose.
3/4" (19 mm) hose with G1 (33.3 mm) threaded
connection.
Complete ready to connect, vacuum tight suction
hose for direct connection to the pump. To extend
the suction assembly or for use with suction filters.
3/4" (19 mm) hose with G1 (33.3 mm) threaded
connection.
Vacuum-tight spiral hose, to be cut into individual
lengths. Can be used as individual suction assem-
bly combined with connections and suction filters.
To be connected to the suction hose meter length.
The backflow stop prevents the return flow of the
transported water and thus shortens the re-suction
time.
To be connected to the suction hose meter length.
The backflow stop prevents the return flow of the
transported water and thus shortens the re-suction
time.
Durable metal/plastic construction. Suitable for 3/4"
(19 mm) and 1" (25.4 mm) hoses.
Pump prefilter to protect the pump from coarse dirt
particles or sand. The filter insert can removed for
cleaning. With G1 (33.3 mm) threaded connection.
For the vacuum-tight connection of the suction hose
to the pump.
Suitable for 3/4" (19 mm) or 1" (25.4 mm) hoses.
With rotating G1" (33.3 mm) threaded connection.
Including backflow valve, flat seal and hose clamp.
If used for garden pumps, install the flat seal.
To connect 1/2" (12.7 mm) water hoses to pumps
with G1 (33.3 mm) threaded connections.
– 9
EN 25