Important Information; Installation Information - Duravit D-Code Montageanleitung

Important information

About the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
ADVICE! For avoiding property damage
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Target group and qualification
The bathtub must only be installed by trained plumbing
engineers.
NoTE!
Local installation regulations and any country-specific
standards must be observed at all times.

Installation information

Please read the pre-installation data sheets prior to
the installation. These are available to download on the
Internet at www.pro.duravit.com.
23
Providing for an inspection hatch (Diagram 23)
• Area: drain and overflow fittings
• Dimensions of the inspection hatch
for drain fittings: min. 20 x 20 cm
24
Closing inspection hatch (Diagram 24)
• Sealed to avoid spray water
• Only to be opened with a tool
5
BA_M_Einbau_D-Code/17.03.5