Chapter 5: Setting Up The Wireless-G Broadband Router; Overview; Using The Setup Wizard; Figure 5-1: Setup Wizard's Welcome - Language Selection Screen - Linksys WRT54GS Bedienungsanleitung

Wireless-G Broadband Router with SpeedBooster

Chapter 5: Setting up the Wireless-G Broadband Router

Overview

The Wireless-G Broadband Router with SpeedBooster Setup Wizard will guide you through the installation
procedure. It will go through the instructions for configuring the Router's network and wireless settings.

Using the Setup Wizard

1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and
the Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that
appears, enter D:\setup.exe (if "D" is the letter of your CD-ROM drive).
2. The Setup Wizard will automatically detect the language setting of your PC from the languages available on
the wizard. On the initial Welcome screen, click the Next button if you want to proceed with the Setup Wizard
using the current language. If you want to use a different language, select the appropriate language, and then
click the Next button.
3. On the following Welcome screen, click the Click Here to Start button if this is the first time you are running
the Setup Wizard. These are your other choices:
Wireless Setup - If you have a computer displaying the SecureEasySetup logo, then click Wireless Setup
and proceed to the section at the end of this chapter, "Using SecureEasySetup to Configure Your Notebook."
NOTE: SecureEasySetup uses WPA-Personal encryption. If your current wireless devices do not
support WPA-Personal security, then you cannot use SecureEasySetup on your network. You will
need to manually configure your network security using the encryption supported by your
existing devices.
Norton Internet Security - Click the Norton Internet Security button to install the Norton Internet Security
software program.
User Guide - Click the User Guide button to open the PDF file of this User Guide.
Exit - Click the Exit button to exit the Setup Wizard.
Chapter 5: Setting up the Wireless-G Broadband Router
Overview
Figure 5-1: Setup Wizard's Welcome - Language
Selection Screen
Figure 5-2: Setup Wizard's Welcome - Start
Wizard Screen
13