Mp3 Player; Usb Storage Devices; Set Display Brightness; Apply Factory Settings - Philips Fidelio SkyQuake B8 Benutzerhandbuch

MP3 player

Connect your MP3 player to play your
audio files or music.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio
cable, connect the MP3 player to
the AUDIO IN connector on this
product.
2
Press repeatedly AUDIO IN on the
remote control until AUDIO IN is
displayed on the display panel.
3
Press the buttons on the
MP3 player to select and play audio
files or music.

USB storage devices

Enjoy audio on a USB storage device,
such as an MP3 player and USB flash
memory, etc.
What you need
•
A USB storage device that is
formatted for FAT16 or FAT32 file
systems, and complies with the
Mass Storage Class.
•
An MP3 file on a USB storage
device.
1
Connect a USB storage device to
this product.
2
Press USB on the remote control.
3
Use the remote control to control
play.
•
Press to start, pause or
resume play.
•
Press /
previous or next track.
EN
16
to skip to the
•
During USB play, press USB to
select one of the following play
modes.
• ALL RPT: repeat all the tracks
in one folder.
•
OFF RPT: repeat mode is
turned off.
Note
•
Support a USB storage device up to 32GB.
•
This product may not be compatible with
certain types of USB storage device.
•
If you use a USB extension cable, USB
HUB, or USB multi-reader, the USB storage
device may not be recognized.
•
Digital camera PTP and MTP protocols are
not supported.
•
Do not remove the USB storage device
while it is being read.
•
DRM-protected music files (MP3) are not
supported.
•
Support a USB port: 5V

Set display brightness

You can press DIM repeatedly to select
a different brightness level of the
display panel on this product.
If you select AUTO OFF, LED message is
switched off after 10 seconds of button
inactivity.

Apply factory settings

In case of no response from this
product , you can reset this product to
the default settings programmed at the
factory.
1
In HDMI ARC mode (press HDMI
ARC), on the remote control, within
six seconds, press
Volume - once, and then hold
down BASS -.
, 500mA.
twice then