Black+Decker BCASK891D Bedienungsanleitung Seite 8

ENGLISH
Carry the hedge trimmer by the handle with the cutter
u
blade stopped. When transporting or storing the
hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce possible
personal injury from the cutter blades.
Hold the power tool by insulated gripping surfaces
u
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give
the operator an electric shock.
The intended use is described in this instruction
u
manual. The use of any accessory or attachment or per-
formance of any operation with this tool other than those
recommended in this instruction manual can present a risk
of personal injury and/or damage to property.
Do not carry the tool with your hands on the front
u
handle, switch or the trigger switch unless the battery
has been removed.
If you have not used a hedge trimmer before, prefer-
u
ably seek practical instruction by an experienced user
in addition to studying this manual.
Never touch the blades while the tool is running.
u
Never attempt to force the blades to come to a stand-
still.
Do not put the tool down until the blades have come
u
to a complete standstill.
Regularly check the blades for damage and wear. Do
u
not use the tool when the blades are damaged.
Take care to avoid hard objects (e.g. metal wire, rail-
u
ings) when trimming. Should you accidentally hit any
such object, immediately switch the tool off and check for
any damage.
Should the tool start to vibrate abnormally, immedi-
u
ately switch it off and remove the battery then check
for any damage.
If the tool stalls, immediately switch it off. Remove the
u
battery before attempting to remove any obstructions.
After use, place the blade sheath supplied over the
u
blades. Store the tool, making sure that the blade is not
exposed.
Always ensure that all guards are fitted when using
u
the tool. Never attempt to use an incomplete tool or a tool
with unauthorised modifications.
Never allow children to use the tool.
u
Be aware of falling debris when cutting the higher
u
sides of a hedge.
Always hold the tool with both hands and by the
u
handles provided.
Keep extension cords away from cutting elements.
u
8
(Original instructions)
@
Warning! Additional safety warnings for String
trimmers
Warning! Cutting elements continue to rotate after the motor
is switched off.
Be familiar with the controls and the proper use of the
u
appliance.
Always remove the battery from the appliance
u
whenever the appliance is unattended, before clearing
a blockage, before cleaning and maintenance, after
striking a foreign object or whenever the appliance
starts vibrating abnormally.
Do not use the appliance if the cords are damaged or
u
worn.
Wear stout shoes or boots to protect your feet.
u
Wear long trousers to protect your legs.
u
Before using the appliance, check that your cutting
u
path is free from sticks, stones, wire and any other
obstacles.
Only use the appliance in the upright position, with
u
the cutting line near the ground. Never switch the appli-
ance on in any other position.
Move slowly when using the appliance. Be aware that
u
freshly cut grass is damp and slippery.
Do not work on steep slopes. Work across the face of
u
slopes, not up and down.
Never cross gravel paths or roads while the appliance
u
is running.
Never touch the cutting line while the appliance is
u
running.
Do not put the appliance down until the cutting line
u
has come to a complete standstill.
Use only the appropriate type of cutting line. Never
u
use metal cutting line or fishing line.
Be careful not to touch the line trimming blade.
u
Take care to keep the mains cable away from the cut-
u
ting line. Always be aware of the position of the cable.
Keep hands and feet away from the cutting line at all
u
times, especially when switching on the motor.
Before using the appliance and after any impact,
u
check for signs of wear or damage and repair as
necessary.
Never operate the appliance with damaged guards or
u
without guards in place.
Take care against injury from any device fitted for
u
trimming the filament line length. After extending new
cutter line always return the machine to its normal operat-
ing position before switching on.
Always ensure that the ventilation slots are kept clear
u
of debris.
Do not use the lawn trimmer (edge trimmer), if the
u
cords are damaged or worn.