Continuous Fi Ring; Loading Batteries - Olympus FL-300R Bedienungsanleitung

Thank you for purchasing this Olympus product. To ensure your safety, please read this
instruction manual before use, and keep it handy for future reference.
Names of parts (Fig. Names of parts (Fig.
1 Light-emitting area
2 Lock release
button
3 Lock pin
4 TEST button/
CHARGE lamp
Continuous fi ring Continuous fi ring
The fl ash may become hot when fi red many
times in succession, resulting in damage
or malfunction. The fl ash should be fi red
no more than 10 times in succession at
intervals of 6 seconds, after which it should
be left unused for at least 10 minutes.
Preparing a battery (sold separately) Preparing a battery
Choose from the below batteries:
• AAA (R03) alkaline batteries (x 2)
• AAA (R03) NiMH batteries (x 2)
p. 3) p. 3)
5 AUTO CHECK
lamp
6 ON/OFF button
7 W knob
8 RC switch
9 Remote sensor
(sold separately)
x
Notes
AAA (R03) manganese batteries cannot be used.

Loading batteries

Loading batteries
1
Open the battery compartment cover.
2
Insert the batteries with correct
+/– polarity.
Battery compartment Battery compartment
cover cover
3
Close the battery compartment cover.
7
EN