Philips QT4080 Bedienungsanleitung Seite 8

ENGLISH
8
Battery fully charged
When the battery is fully charged, the bottom three green lights burn
continuously and the top green light blinks at a very high frequency.
Battery capacity indication
Your Philips beard trimmer is equipped with a battery capacity
indication.This indication becomes visible for 5 seconds every time the
appliance is switched on or off.The number of burning green lights
indicates the amount of battery capacity that is available.
Charging the appliance
QT4080/QT4060 only:The appliance can also be run directly from the
B
mains (see chapter 'Using the appliance', section 'Corded trimming').
Charge the appliance fully before you start using it for the first time or
after a long period of disuse.
1 Make sure the appliance is switched off before you start charging
it.
2 Insert the appliance plug into the appliance and put the
powerplug in the wall socket.
QT4080 only:
◗
It will take approx. 1 hour to fully charge the battery if it is
completely empty. If there is still battery capacity available, fully
charging the battery will take less time.
◗
A fully charged appliance has a cordless trimming time of up to
50 minutes.
QT4060/QT4040 only:
◗
The charging light goes on to indicate that the appliance is
charging (fig. 5).
The charging light will not go out when the battery is fully charged.
◗
It will take approx. 10 hours to fully charge the battery if it is
completely empty. If there is still battery capacity available, fully
charging the battery will take less time.