Teac MC-D800 Bedienungsanleitung Seite 53

Each time the INFO button is pressed, the RDS mode is
changed as follows:
PS (Program service name)
When you select PS, the station's name will be dis-
played . If there is no PS data, "NO PS" will be displayed .
PTY (Program type)
When you select PTY, the program type will be displayed .
If there is no PTY data, "NO PTY" will be displayed .
RT (Radio text)
When you select RT, up to 64 characters of information
transmitted by the station will be displayed .
If there is no RT data, "NO TEXT" will be displayed .
CT (Clock time)
When you select CT, the clock time provided from the
station will be displayed .
If there is no CT data, "NO CT" will be displayed .
o After viewing the CT, press the INFO button again to
show the frequency .
RDS Clock Time (CT)
The clock setting will be automatically adjusted
according to the CT data .
If you tune in an RDS station broadcasting incorrect
CT data, the clock could be set incorrectly, and this
could affect timer operation .
No matter which RDS mode is selected, the unit
receives CT data and adjusts the clock .
To turn the CT mode on and off, press and hold
the INFO button for more than two seconds,
then press a TUNING button (j/k) to select on
or off.
53